 |
CLICK PICTURE FOR VIDEO
|
Gullco PIPE KAT Automate Pipe Welding Systems with intergrated wire feeder unit incorporates 40 IPM welding carriage design with quick action mounting for ease of installation, linear oscillatorr with adjustable weave width and weld joint centerline adjustment. All electronic motorized functions incorporate jog settings. System comes with main control box with 12ft. umbilical and 27ft. of gas hose and ground cable, wire feed spool capacity of 10lbs. with a maximum wire speed of 720 IPM and a wire size range of 0.8 to 1.4mm. The welding torch uses Abicor Binzel consumables. |
Download PDF Operating Manual - COMING SOON |
 |
WELD TORCH AND WIRE INFORMATION:
Welding torch uses Abicor Binzel consumables. Wire feed 10lb. spool capacity. Maximum wire speed of 720 IPM. With a wire size range of .8 to 1.4 mm. All motors 24 wolt DC.
|
EASY TO USE
QUICK SETUP TIME
|
Download PDF Brochure/Literature
Download Dimensional Drawing
|
 |
- Motorized Width Adjustment
- Motorized Weld Head Joint Positioning
- Motorized Vertical Slide
- High Speed Carriage Jog
- Up / Down Jog Switch
- Wire Feed Jog
- Weld Enabled / Diabled Switch
- Auto Start Warning Buzzer
|
 |
| Remote pendant on 12ft. of cable incorporates carriage speed and jog, wire feed speed and jog, vertical slide adjustments, oscillation width and centerline adjustment with start/ stop and emergency stop buttons. |
|
