 |
Sphere Welding
Kohimo Co. was able to reduce production time and improve weld quality in the production of spheres using Gullco products and technologies. In this project Kohimo was manufacturing 18m. Diameter sphere with 20mm Thick plate in Estonia.
More details... |
|
 |
Ship Building 1
Even when adopting this philosophy, welding has to be carried out in a variety of other positions. Many shipyards have found major benefits when welding a specific section of the ship hull in the overhead position
More details... |
|
 |
Ship Building 2
Swan Hunter (Tyneside) Ltd. Of Wallsend, UK are in the process of building two Alternative Landing Naval ships for the Royal Fleet Auxiliary. The use of Gullco equipment is being used in this project for the purpose of cost reducing as well as increased quality and efficiency.
More details... |
|
 |
Custom Built Systems
The Caterpillar Stockton (UK) Ltd. Plant selected Gullco International (UK) Limited to supply weld automation equipment/ systems to improve quality and efficiency in a variety of M.I.G/ M.A.G. welding applications. Gaffney Industrial and Welding Supplies Ltd.
More details... |
|
 |
Pipe Cutting
Several years ago Saipem was faced with the need to cut large diameter pipe that was used in “driven pile” applications. Gullco was selected for this difficult application.
More details... |
|
 |
Portable Beveller
Small portable bevellers have enjoyed success replacing larger planning machines and flame cutting equipment for beveling of aluminum, and low carbon steel.
More details... |
|
 |
Irish Cement
Irish Cement was required to remove a section of the kiln to facilitate removal and replacement of one of the “tyres”. This involved cutting out the section very accurately.
More details... |
|
 |
Twin Arc Seam Tracker Welding System
The equipment chosen was Gullco’s “KAT” variable speed travel carriage and Gullco electronic seam tracker modified to position two 400 amp. water cooled, Bernard torches in micro-adjustable gun holders.
More details... |
|
 |
Splice Welding Operation
A large part of its business is fabrication of large furnace vessels called inner coves, these weldments require the firm to splice several sheets of plates into one, then roll-form the spliced work piece into a cylindrical cover.
More details... |
|
 |
Cladding Systems
Gullco have for many years manufactured vertical overlay bridges / gantries mainly for the application of cladding Boiler Tube sheets both “in factory” during manufacture and later for “on site” refurbishment.
More details... |
|
 |
Beveling Aluminum
The Gullco International customer does plenty of plate beveling heavy plates, 5254 and 5654 aluminum, typically 10x30 feet x1/2 inch weighing 2,100 pounds, go into the manufacture of railroad tank cars.
More details... |
|
 |
