The Importance of Good Weld Preparation

Posted on January 07, 2021 14:43 pm

3 Minute Read

Quick Summary: Beveling is one of the most important preparation processes in any welding application and one which can create restrictive bottlenecks and slow productivity. Poor edge preparation leads to improper joint fit-ups and ultimately to poor weld quality.

Beveling is one of the most important preparation processes in any welding application and one which can create restrictive bottlenecks and slow productivity. Poor edge preparation leads to improper joint fit-ups and ultimately to poor weld quality. Weld edge prep consistency and accuracy helps to reduce excessive welding and eliminates consumable wastage, heat input, and extra man-hours.

Why Use KBM® mechanized plate beveling machine from GULLCO®?

By using a KBM® mechanized plate beveling machine from GULLCO® companies can increase productivity, reduce material handling, and improve weld quality. All while eliminating the heat effected zones caused by flame cutting or grinding and improving welder safety. When you combine these benefits with the fact that beveling with the sheering process of the KBM® and eliminating the load noise and sparks of alternative processes it is no wonder so many companies are adopting mechanized beveling processes.

Man vs Machine – Plate Beveling Video:

The importance of accurate plate edge preparation can be well understood when we look at some of the most important heavy fabrication industries such as Ship Building, Tank Welding, and Energy Production.

The fabrication of windmill towers must address the large material handling needs of producing the shells while maximizing the consistency of the edge consistency to ensure the fit-up of one section to the next when assembling in the field. Some wind towers reach heights of 100m or more which require beveled edges of up to 1500m or more per tower. Fast, accurate, consistent, and economical processes are required for companies to remain on time and on budget, and with speeds of up to 3m per minute with no material distortion the KBM® series of plate edge bevelers have been implemented in companies worldwide to give them the edge they need to meet these high industry demands.

Benefits of Oxy-fuel Beveling

Many applications use the oxy-fuel beveling process for cutting carbon steel plates. The equipment is low cost and can be used manually or can be mechanized but this process comes with a variety of disadvantages.

The disadvantages of using the fuel cutting process range from low speeds, high thermal input, inaccuracies in the bevel angle leading to excessive weld deposition and consumable consumption, and ultimately rework. Significant man-hours, cost of gases, and other grinding consumables are some of the downsides to the fuel cutting process which are reduced or eliminated when using the cold shear process of the KBM® plate beveler.

Due to their portability, maneuverability, and high operating speeds the KBM® greatly reduces material handling costs as they are capable of being brought to the workpiece and models are available for beveling both the top and underside of the plate without the need to rotate or flip the material. Various materials like carbon steels, alloyed steels, stainless steels, high tensile steels, aluminum can be very successfully beveled using these machines. Mechanical beveling being a non-thermal process has an important metallurgical advantage of not creating a heat-affected zone (HAZ) and not causing thermal distortion.

Some of the other distinct advantages of the mechanized shear beveling process are:

  • Noise pollution, and vibration-free operation
  • Reduced material handling cost and machine portability
  • Spring-loaded undercarriage allows the machine to run on an inconsistent or undulating floor or navigate the curve in long plates.
  • Easy and quick adjustment of the root face and bevel angle
  • Simple operation and low skill ceiling required
  • The top and bottom of the plates can be beveled simultaneously by using two machines in tandem.

Relevant Resources

arrow left
arrow right

How to Properly Implement Welding Automation to Improve Return on Investment

Learn more about the value of automated welding systems, how to calculate your automation ROI, and how to get started.

Learn More
link

How to Utilize Ceramic Weld Backing to Maximize Quality and Minimize Rework

Traditional backside welding comes with several challenges, such as reduced product quality and the need for rework. Learn how to maximize quality and minimize rework.

Learn More
link

The Importance of Beveling in Proper Weld Preparation

One of the most crucial surface preparation processes in welding applications is beveling. Learn why.

Learn More
link

We Have a wide selection of helpful resources

Resources

Trusted by Industry Leaders

Frequently asked questions

Find quick answers to your questions here, ask our AI assistant, or contact us for any additional inquiries.

Is automation right for my application?

Gullco’s automation solutions can be tailored to fit most applications. Our products are designed for flexibility and customization. To determine the best approach for your needs, please provide some details about your project. We’re happy to discuss how we can help you achieve optimal results.

Can I get pricing on your product?

Thanks for your interest in Gullco products! For accurate pricing and to discuss your specific needs, we recommend you Request a Quote and your local distributor will promptly respond.

Do you have a distributor in my area?

Gullco International has presence worldwide. To locate the distributor in your area, visit our distributor locator and choose your region and location.

Can I get a product demonstration?

Absolutely! We’d be happy to schedule a product demonstration for you. Please let us know which product(s) you’re interested in and your preferred date and time, and we’ll get that arranged. We look forward to showing you how Gullco can improve your operations.

Can you replace my product manual?

You can locate your product manual in our Resource library.

What makes GULLCO's products so rugged?

That’s a great question! We’re really proud of the ruggedness of our Gullco products. A big part of it comes from our commitment to North American manufacturing. We’ve invested over $12 million in state-of-the-art CNC equipment to ensure precision and durability. Plus, we do most of the manufacturing in-house, which gives us tight control over quality.

Ready to get started?

With over seven decades of experience and a worldwide reach, we synthesize the skills, knowledge, and experience to offer reliable, innovative solutions to automate welding and associated processes. We are committed to continual improvement, developing new welding automation systems and equipment to address the ever-changing needs of the industry.

# # # # # # # #