3 Items Added to Quote

View Quote Cart

Home » All Categories»Weld Automation»Submerged Arc Welding System SAM®»

Submerged Arc Welding System SAM®

Item # GM-02-275-C — Submerged Arc Welding System SAM®

All Downloads

Heavy Duty MOGGY®for Submerged Arc and Mig Welding

The versatility and reliability of the world famous Gullco MOGGY®trackless travel carriage system and a variety of quality engineered components combine to provide a highly flexible self-contained welding unit. This Gullco unit is designed to produce precision, quality Submerged Arc or MIG welds.

SAM®Carriage, Model GM-02-295 - Friction drive heavy-duty travel Carriage, with positive chain drive on four (4) rubber tired wheels using a closed loop tack feedback for accurate speed control. Carriage controlled by the Gullco low voltage 24 volt GSP microprocessor pulse width modulation motor control, all mounted in a remote pendant control box attached to 8 ft. (243.84 cm) control cable housing the GSP control providing the forward/stop/reverse switch and infinitely variable 4-turn speed potentiometer. LED display in IPM or cm/min. An interface cable assembly allows the Miller HDC 1500 DX to control the run/stop function of the SAM®Carriage. A manual clutch enables free wheeling. Carriage complete with a main mounting mast and handle assembly, mounting arm for one wire reel, all mounting arms equipped with quick jaw mast clamp assembly; vertical and horizontal manual 4" x 4" slides (with hardened ground rods with sleeve bearings for ease of adjustment). Control support arm and one (1) set (two[2]) adjustable guide roll arms. For operation on either 42/115/230 volts, single phase, 50/60 Hz AC power supply.

SAM®Carriage, Model GM-02-275 - SAM®Heavy-Duty Friction Drive Carriage for mounting customer's supplied single sub-arc package. Carriage specifications same as model GM-02-295. No welding equipment is supplied.

GM-02-250 SAM®Heavy-Duty Friction Drive Carriage
Carriage specifications same as that of the GM-02-295, but provided with 17" x 22" (43.18 x 55.89 cm) aluminum plate providing full flat mounting surface for customer's supplied wire feeder.

Special track and wheels available upon request.

Submerged Arc Welding System SAM®

Heavy Duty MOGGY®for Submerged Arc and Mig Welding

SAM®Carriage, Model GM-02-295 – Friction drive heavy-duty travel Carriage, with positive chain drive on four (4) rubber tired wheels using a closed loop tack feedback for accurate speed control. Carriage controlled by the Gullco low voltage 24 volt GSP microprocessor pulse width modulation motor control, all mounted in a remote pendant control box attached to 8 ft. (243.84 cm) control cable housing the GSP control providing the forward/stop/reverse switch and infinitely variable 4-turn speed potentiometer. LED display in IPM or cm/min. An interface cable assembly allows the Miller HDC 1500 DX to control the run/stop function of the SAM®Carriage. A manual clutch enables free wheeling. Carriage complete with a main mounting mast and handle assembly, mounting arm for one wire reel, all mounting arms equipped with quick jaw mast clamp assembly; vertical and horizontal manual 4″ x 4″ slides (with hardened ground rods with sleeve bearings for ease of adjustment). Control support arm and one (1) set (two[2]) adjustable guide roll arms. For operation on either 42/115/230 volts, single phase, 50/60 Hz AC power supply.

SAM®Carriage, Model GM-02-275 – SAM®Heavy-Duty Friction Drive Carriage for mounting customer’s supplied single sub-arc package. Carriage specifications same as model GM-02-295. No welding equipment is supplied.

GM-02-250 SAM®Heavy-Duty Friction Drive Carriage
Carriage specifications same as that of the GM-02-295, but provided with 17″ x 22″ (43.18 x 55.89 cm) aluminum plate providing full flat mounting surface for customer’s supplied wire feeder.

Special track and wheels available upon request.

Add to quote

SKU: GM-02-275-C Categories: Submerged Arc Welding System SAM®, Weld Automation

Add to Quote

QTY

Specifications

Specifications - Power Supply

for operation on either 42/115/230 volts, single phase, 50/60 Hz AC

Specifications - Voltage

230 V

Specifications - Speed Range

10 to 168 cm/min

Related Products

Arc Length System | Torch Height Control

Link

Weld Shaver

Link

Gullco Gantry/Bridge Systems

Link

Versatile Remote Controlled Weld Oscillation Head

Link

Through Hole Weld Positioner - Programmable - 0.75 - 12.5 RPM

Link

Weld Positioner - Programmable and Gas Purge - 0.75 - 12.5 RPM

Link

Weld Positioner - Programmable - 0.27 - 4.63 RPM

Link

Through Hole Weld Positioner - Programmable - 0.27 - 4.63 RPM

Link

Weld Positioner - Programmable and Gas Purge - 0.27 - 4.63

Link

Weld Positioner - 0.75 - 12.5 RPM

Link

Through Hole Weld Positioner - 0.75 - 12.5 RPM

Link

Weld Positioner - Gas Purge - 0.75 - 12.5 RPM

Link

Weld Positioner - Programmable - 0.75 - 12.5 RPM

Link

Weld Positioner - 0.27 - 4.63 RPM

Link

Through Hole Weld Positioner - 0.27 - 4.63 RPM

Link

Weld Positioner - Gas Purge - 0.27 - 4.63 RPM

Link

Welding Electrode Stabilizing Ovens - In-Shop Models

Link

Submerged Arc Welding System SAM®

Link

Submerged Arc Welding System SAM®

Link

Swivel Clamps

Link

Square Clamps

Link

Square Clamps

Link

Standard Cutting Torch Holder

Link

Submerged Arc Welding System SAM®

Link

Submerged Arc Welding System SAM®

Link

Submerged Arc Welding System SAM®

Link

Submerged Arc Welding System SAM®

Link

Semi-Automatic

Link

Side Beam

Link

Rigid KAT® Tracks

Link

Rigid KAT® Tracks

Link

Self-Centering Welding Gripper

Link

Semi-Automatic Gun Holder

Link

Remote Control Pendants

Link

Rigid KAT® Tracks

Link

Rigid KAT® Tracks

Link

Rigid KAT® Tracks

Link

Rack Boxes

Link

Rack Boxes for Arm Mounting

Link

Rack Boxes for Arm Mounting

Link

Rack Boxes for Arm Mounting

Link

Rack Boxes for Arm Mounting

Link

Rack Box Riser Bracket

Link

Rack Boxes

Link

Rack Boxes

Link

Rack Boxes

Link

Rack Arms

Link

Rack Arms

Link

Rack Arms

Link

Rack Arms

Link

Rack Arms

Link

Rack Arms

Link

Rack Arms

Link

Quick Release Track Mounting Lever (A)

Link

Quick Release Track Mounting Support Bar (B)

Link

Hex Bolt, full thread 5/16”-18X1-1/2” (C)

Link

Hex Nut 5/16”-18 (D)

Link

Hex Bolt 1/4”-20X3/4” (F)

Link

Product

Link

MOGGY® - Magnetic Base - Stitch and Continuous Welding Carriage

Link

MOGGY® - Stitch and Continuous Welding Carriage

Link

MOGGY® - Dual Torch - Stitch Welding or Continuous Welding

Link

Battery Powered Welding Automation - MOGGY® Carriage

Link

Product

Link

Perpendicular Track Mounting Bracket

Link

Pipe KAT® - Flexible Track - 115 VAC

Link

Pipe KAT® - Flexible Track - 230 VAC

Link

Product

Link

On/Off Magnet Track Mounting Devices

Link

On/Off Magnet Track Mounting Devices

Link

On/Off Magnet Track Mounting Devices

Link

Self Aligning On/Off Magnet Assemblies

Link

Product

Link

Product

Link

Product

Link

Product

Link

Product

Link

Product

Link

Product

Link

Track Mounting Pad (E)

Link

Product

Link

Product

Link

Product

Link

Product

Link

Height Sensor has an adjustable swivel copper guide wheel to contact the work surface

Link

Height Sensor has a stainless steel ball transfer that is particularly useful to maintain contact on curved surfaces or vertical applications

Link

Seam Tracker is specifically designed for fillet welding applications

Link

KAT® Weld Oscillation Automation Carriage

Link

KAT® Weld Oscillation Automation Carriage

Link

KAT® Weld Oscillation Automation Carriage

Link

KAT® Weld Oscillation Automation Carriage

Link

KAT® Weld Oscillation Automation Carriage

Link

KAT® Weld Indexing Carriage - Flexible Track - 0.8 - 25.8 IPM (2 - 65.4 cm/min) - 115 VAC

Link

KAT® Weld Indexing Carriage - Flexible Track - 0.8 - 25.8 IPM (2 - 65.4 cm/min) - 230 VAC

Link

KAT® Weld Indexing Carriage - Flexible Track - 1.5 - 51.5 IPM (3.9 - 131 cm/min) - 42 VAC

Link

KAT® Weld Indexing Carriage - Flexible Track - 1.5 - 51.5 IPM (3.9 - 131 cm/min) - 115 VAC

Link

KAT® Weld Indexing Carriage - Flexible Track - 1.5 - 51.5 IPM (3.9 - 131 cm/min) - 230 VAC

Link

KAT® Weld Indexing Carriage - Flexible Track - 4.2 - 139.1 IPM (10.6 - 353 cm/min) - 42 VAC

Link

KAT® Weld Indexing Carriage - Flexible Track - 4.2 - 139.1 IPM (10.6 - 353 cm/min) - 115 VAC

Link

KAT® Weld Indexing Carriage - Flexible Track - 4.2 - 139.1 IPM (10.6 - 353 cm/min) - 230 VAC

Link

KAT® Weld Indexing Carriage - Rigid Track - 1 - 32.7 IPM (2.5 - 83.1 cm/min) - 115 VAC

Link

KAT® Weld Indexing Carriage - Rigid Track - 1 - 32.7 IPM (2.5 - 83.1 cm/min) - 230 VAC

Link

KAT® Weld Indexing Carriage - Rigid Track - 2.7 - 88.4 IPM (6.7 - 224 cm/min) - 42 VAC

Link

KAT® Weld Indexing Carriage - Rigid Track - 2.7 - 88.4 IPM (6.7 - 224 cm/min) - 115 VAC

Link

KAT® Weld Indexing Carriage - Rigid Track - 2.7 - 88.4 IPM (6.7 - 224 cm/min) - 230 VAC

Link

KAT® Weld Indexing Carriage - Flexible Track - 0.8 - 25.8 IPM (2 - 65.4 cm/min) - 42 VAC

Link

KAT® Auto-weld Automation Carriage - Flexible Track - 4.2 - 139.1 IPM (10.6 - 353 cm/min) - 42 VAC

Link

KAT® Auto-weld Automation Carriage - Flexible Track - 4.2 - 139.1 IPM (10.6 - 353 cm/min) - 115 VAC

Link

KAT® Auto-weld Automation Carriage - Flexible Track - 4.2 - 139.1 IPM (10.6 - 353 cm/min) - 230 VAC

Link

KAT® Flexible Track

Link

KAT® Weld Indexing Carriage - Rigid Track - 0.5 - 16.4 IPM (1.2 - 41.6 cm/min) - 42 VAC

Link

KAT® Weld Indexing Carriage - Rigid Track - 0.5 - 16.4 IPM (1.2 - 41.6 cm/min) - 115 VAC

Link

KAT® Weld Indexing Carriage - Rigid Track - 0.5 - 16.4 IPM (1.2 - 41.6 cm/min) - 230 VAC

Link

KAT® Weld Indexing Carriage - Rigid Track - 1 - 32.7 IPM (2.5 - 83.1 cm/min) - 42 VAC

Link

KAT® Auto-weld Automation Carriage - Flexible Track - 0.8 - 25.8 IPM (2 - 65.4 cm/min) - 115 VAC

Link

KAT® Auto-weld Automation Carriage - Flexible Track - 0.8 - 25.8 IPM (2 - 65.4 cm/min) - 230 VAC

Link

KAT® Auto-weld Automation Carriage - Flexible Track - 1.5 - 51.5 IPM (3.9 - 131 cm/min) - 42 VAC

Link

KAT® Auto-weld Automation Carriage - Flexible Track - 1.5 - 51.5 IPM (3.9 - 131 cm/min) - 115 VAC

Link

KAT® Auto-weld Automation Carriage - Flexible Track - 1.5 - 51.5 IPM (3.9 - 131 cm/min) - 230 VAC

Link

KAT® Auto-weld Automation Carriage - Rigid Track - 1 - 32.7 IPM (2.5 - 83.1 cm/min) - 115 VAC

Link

KAT® Auto-weld Automation Carriage - Rigid Track - 1 - 32.7 IPM (2.5 - 83.1 cm/min) - 230 VAC

Link

KAT® Auto-weld Automation Carriage - Rigid Track - 2.7 - 88.4 IPM (6.7 - 224 cm/min) - 42 VAC

Link

KAT® Auto-weld Automation Carriage - Rigid Track - 2.7 - 88.4 IPM (6.7 - 224 cm/min) - 115 VAC

Link

KAT® Auto-weld Automation Carriage - Rigid Track - 2.7 - 88.4 IPM (6.7 - 224 cm/min) - 230 VAC

Link

KAT® Auto-weld Automation Carriage - Flexible Track - 0.8 - 25.8 IPM (2 - 65.4 cm/min) - 42 VAC

Link

KAT®300 Welding Carriage | Radial Weld Oscillation

Link

Kat Automatic Gouging Machine

Link

KAT® Auto-weld Automation Carriage - Rigid Track - 0.5 - 16.4 IPM (1.2 - 41.6 cm/min) - 42 VAC

Link

KAT® Auto-weld Automation Carriage - Rigid Track - 0.5 - 16.4 IPM (1.2 - 41.6 cm/min) - 115 VAC

Link

KAT® Auto-weld Automation Carriage - Rigid Track - 0.5 - 16.4 IPM (1.2 - 41.6 cm/min) - 230 VAC

Link

KAT® Auto-weld Automation Carriage - Rigid Track - 1 - 32.7 IPM (2.5 - 83.1 cm/min) - 42 VAC

Link

KAT® Automation Carriage - Rigid Track - 0.5 - 16.4 IMP (1.2 - 41.6 cm/min) - 230 VAC

Link

KAT® Automation Carriage - Rigid Track - 1 - 32.7 IMP (2.5 - 83.1 cm/min) - 42 VAC

Link

KAT® Automation Carriage - Rigid Track - 1 - 32.7 IMP (2.5 - 83.1 cm/min) - 230 VAC

Link

KAT® Automation Carriage - Rigid Track - 2.7 - 88.4 IMP (6.7 - 224 cm/min) - 42 VAC

Link

KAT® Automation Carriage - Rigid Track - 2.7 - 88.4 IMP (6.7 - 224 cm/min) - 115 VAC

Link

KAT®300 Welding Carriage | Linear Weld Oscillation

Link

KAT® Automation Carriage - Flexible Track - 4.2 - 139.1 IMP (10.6 - 353 cm/min) - 115 VAC

Link

KAT® Automation Carriage - Flexible Track - 4.2 - 139.1 IMP (10.6 - 353 cm/min) - 230 VAC

Link

KAT® Automation Carriage - Rigid Track - 0.5 - 16.4 IMP (1.2 - 41.6 cm/min) - 42 VAC

Link

KAT® Automation Carriage - Rigid Track - 1 - 32.7 IMP (2.5 - 83.1 cm/min) - 115 VAC

Link

KAT® Automation Carriage - Rigid Track - 2.7 - 88.4 IMP (6.7 - 224 cm/min) - 230 VAC

Link

KAT® Automation Carriage - Rigid Track - 0.5 - 16.4 IMP (1.2 - 41.6 cm/min) - 115 VAC

Link

KAT® Automation Carriage - Flexible Track - 0.8 - 25.8 IMP (2 - 65.4 cm/min) - 230 VAC

Link

KAT® Automation Carriage - Flexible Track - 1.5 - 51.5 IMP (3.9 - 131 cm/min) - 42 VAC

Link

KAT® Automation Carriage - Flexible Track - 1.5 - 51.5 IMP (3.9 - 131 cm/min) - 115 VAC

Link

KAT® Automation Carriage - Flexible Track - 1.5 - 51.5 IMP (3.9 - 131 cm/min) - 230 VAC

Link

KAT® Automation Carriage - Flexible Track - 4.2 - 139.1 IMP (10.6 - 353 cm/min) - 42 VAC

Link

Gullco Gantry/Bridge Systems

Link

Idler Carriages

Link

KAT® Automation Carriage - Flexible Track - 0.8 - 25.8 IMP (2 - 65.4 cm/min) - 42 VAC

Link

KAT® Automation Carriage - Flexible Track - 0.8 - 25.8 IMP (2 - 65.4 cm/min) - 115 VAC

Link

Electronic Weld Seam Tracker

Link

Heavy Duty Electronic Weld Seam Tracker

Link

400AMP E.A.H.S

Link

800AMP E.A.H.S

Link

Automatic Pipe Turning Rolls for Welding - KAMEL Rolls

Link

Automatic Pipe Turning Rolls for Welding - KAMEL Rolls

Link

Automatic Pipe Turning Rolls for Welding - KAMEL Rolls

Link

Automatic Rotary Weld System

Link

Cable Support Clamp

Link

Center Bonded Mounts

Center Bonded Mounts STA Series

All Product Categories

Weld Automation

Portable Beveling Machines

Ceramic Weld Backing

Welding Electrode Stabilizing Ovens

Accessories

All Products

KAT® 300 Welding and Cutting Automation Carriage

View All

KAT® 200 Welding and Cutting Automation Carriage - Rigid Track

View All

KAT® 200 Welding and Cutting Automation Carriage - Flexible Track

View All

KAT® 100 Mechanized Welding and Cutting Carriage

View All

KAT® Weld Oscillation Automation Carriage

View All

Remote Control Weld Oscillator

View All

KAT® Weld Indexing Automation Carriage

View All

KAT® Auto-Welding Automation Carriage

View All

Portable Trackless Welding Carriage - MOGGY® and Magnetic MOGGY®

View All

Electronic Seam Tracking System - KAT® Tracker

View All

Arc Length System | Torch Height Control

View All

Electronic Arc Height Sensor - E.A.H.S

View All

Mechanical Seam Tracker and Height Sensor System

View All

Remote Control Weld Indexing System

View All

KAT® Arcair Weld Gouging Automation Carriage

View All